Bona drum sander refinishing a hardwood floor in an empty room

Turlock and the Central Valley

Hardwood Floor Sanding & Refinishing in Turlock and the Central Valley

(209) 882-9663

When scratches, gray spots, and worn traffic lanes go through the finish and into the wood, a fresh coat won't fix it. A full sand and refinish takes the floor back to bare wood, removes the old finish and most surface damage, and builds a new finish from scratch.

Fresh Step Wood Floors is a family-owned business run by owner Chris Hillerman. We sand with Bona equipment, edge carefully along baseboards, and finish the floor so it looks like it did when it was new, or better, in a new stain color if you want one.

Not sure you need a full sand? Many floors only need a screen and recoat, which costs less and takes less time. Send us a few photos and we'll tell you honestly which one your floor needs.

What's included

  1. Walk-through and free quote, in person or from photos
  2. Furniture plan: homeowners move their own furniture
  3. Sanding to bare wood with a Bona sander, working through finer grits
  4. Edge sanding along walls, baseboards, and corners
  5. Vacuum and tack clean between steps
  6. Dust containment during sanding
  7. Optional stain, tested on your floor first (see Stain Colors)
  8. Multiple coats of finish (Bona or ProCoat); full sanding typically gets 3 or more coats, with 2–3 hours between coats
  9. Final walk-through and care instructions

Process

  1. Quote: call, text, or send photos
  2. Prep: clear the room (you move furniture), protect doorways
  3. Sand: main floor, then edges and corners, with dust containment
    • Fresh Step technician sanding a hardwood floor with a Bona sander
      Fresh Step technician sanding a hardwood floor with a Bona sander
    • Edge sander working along the baseboard of a hardwood floor
      Edge sander working along the baseboard of a hardwood floor
  4. Stain (optional): sample swatches on your floor, you pick
  5. Finish: coats applied with 2–3 hours between coats
  6. Cure: light foot traffic first; we'll give you exact dry and cure times for your finish before furniture goes back
Freshly refinished glossy hardwood floor in a living room with a fireplace
Freshly refinished glossy hardwood floor in a living room with a fireplace

FAQs

How do I know if my floor needs sanding or just a recoat?

If the scratches are only in the finish and the wood isn't gray or bare, a screen and recoat usually works. If wood is exposed, stained, or deeply scratched, it needs a full sand. Photos help us tell.

How long does sanding and refinishing take?

Most jobs take 1–2 days, depending on the size of the area and the finish. We're often booked a couple of weeks out.

Is it dusty?

Sanding makes dust, so we use dust containment and vacuum between steps.

Can engineered hardwood be sanded?

Sometimes. It depends on how thick the top wood layer is. We check before quoting, and if it can't be sanded safely we'll recommend a screen and recoat instead.

Can I stay in my home during the work?

Usually yes, but you'll need to stay off the floor being worked on until the finish is dry. We'll plan the order of rooms with you.

How much does it cost?

Every floor is different, so we give free quotes. Photos help us quote fast. Call or text (209) 882-WOOD.

Service areas

Also serving Lathrop, Manteca, Delhi, Ripon, Newman, Gustine, Oakdale, and Livingston.

Free quote

Ready for floors that look new again? Call or text (209) 882-WOOD for a free quote, or send your floor photos through the quote form.

Sending this form does not sign you up for texts. The text-message box is optional. You can also call (209) 882-WOOD.

Call (209) 882-WOOD