Rolling a fresh coat of finish during a hardwood screen and recoat

Turlock and the Central Valley

Screen and Recoat: Bring Back the Shine Without Full Sanding

(209) 882-9663

A screen and recoat is the floor's maintenance refinish. We clean the floor, lightly abrade (screen) the existing finish so a new coat will bond, and apply a fresh coat of finish. Light surface scratches and dullness go away, and the new coat adds protection.

Because we don't sand into the wood, it's faster and less costly than a full refinish, with far less dust. It works best on floors where the finish is worn but the wood underneath isn't damaged.

Note: floors with wax, oil soap buildup, or some polish products may need extra cleaning first, or may not take a recoat. We check before we start.

What's included

  1. Inspection and adhesion check for wax or polish buildup
  2. Deep clean of the floor
  3. Screening (light abrasion) of the existing finish
  4. Vacuum and tack clean
  5. Fresh coats of finish (Bona or ProCoat); a screen and recoat typically gets 2 coats, with 2–3 hours between coats
  6. Care tips to make the finish last

Process

  1. Send photos or book a look
  2. Deep clean
    • Machine deep-cleaning a hardwood hallway before recoating
      Machine deep-cleaning a hardwood hallway before recoating
  3. Screen the old finish
  4. Clean up all dust
  5. Roll on new finish (typically 2 coats)
  6. Dry and cure — we'll give you exact dry and cure times for your finish
Hardwood living room floor with renewed glossy finish
Hardwood living room floor with renewed glossy finish

FAQs

What's the difference between screen and recoat and refinishing?

A recoat refreshes the top finish. A full refinish sands down to bare wood. If the wood itself is damaged or you want a new color, you need a full sand.

Will a recoat remove deep scratches?

No. It hides light surface scuffs and dullness. Scratches that go into the wood need a full sand. We don't do board repairs; a refinish can help with light surface issues.

How often should I recoat?

Many homes recoat every few years depending on traffic, pets, and kids. Recoating before the finish wears through can delay a full sand.

How long until I can walk on it?

We'll give you exact dry and cure times for your finish. Most jobs take 1–2 days.

Can you recoat floors that were cleaned with polish products?

Sometimes. Some polishes and oil soaps leave residue a new coat won't stick to. We test first and tell you before any work.

How much does screen and recoat cost?

Every floor is different. Quotes are free, and photos usually let us quote fast. Call or text (209) 882-WOOD.

Service areas

Also serving Lathrop, Manteca, Delhi, Ripon, Newman, Gustine, Oakdale, and Livingston.

Free quote

Dull floors? A screen and recoat may be all you need. Call or text (209) 882-WOOD for a free quote, or send your floor photos through the quote form.

Sending this form does not sign you up for texts. The text-message box is optional. You can also call (209) 882-WOOD.

Call (209) 882-WOOD